Dependable Plumbers Provide Good Work The Best Plumbers Are Well Known from Sandy Podolak's blog

Almost everyone will have their own unique conception when it comes to sump pump installation.What're your beliefs on plumbing and heating near me?

How to Use a Plumber’s Snake A plumber’s snake, or drain auger, is a tool that reaches down into pipes to remove clog-causing blockage. Snakes make up the middle ground between common household plungers and the really big guns. If you’re dealing with a clog too stubborn for your plunger, then a snake is your best chance to clear it out yourself.

Snakes are much more powerful drain-clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly. Here’s everything you should know about using a plumber’s snake.

How does a plumber’s snake work?

what is a plumber's snake?A plumber’s snake is a long, flexible metal cable with a small auger or uncoiled spring on one end and a handle on the other. The auger on the snake looks like a drill bit or a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it. Most home plumber’s snakes are hand-operated, and probably have a rotatable handle or even a crank.

Plumber’s snakes work by entering the drain directly to physically contact and then clear away the obstruction causing the clog. You manually insert the auger end of the snake into the drain and then begin uncoiling by rotating the handle. As the snake uncoils, the auger moves further through the drain pipe, until it breaks through the obstruction.

How do you use a plumber’s snake?

1. Put on some clothes you don’t mind getting dirty and lay some old towels beneath the pipes you’re working on. Depending on the nature of the clog, your snaking procedure could get messy. This is especially important if you end up removing the p-trap.

2. (Optional) Consider removing the p-trap. The p-trap, or p-bend, is the curving piece of pipe beneath the sink. It connects the sink to the greater drain pipe system in your home. The reason it’s curved is to prevent sewer gases from rising through the sink and into the home. P-traps are often made of PVC pipe, though they can also be metal.

You can manually remove the p-trap, either with your hands or with the help of an adjustable wrench. Once you remove the p-trap, you should thoroughly inspect and clean it out. If you find your obstruction, then you won’t have to snake at all! Even if you don’t find anything, removing the trap could make snaking easier.

3. (Optional) Consider removing the trap arm. A trap arm is the part of the pipe between the p-trap and the actual wall pipe. It holds the p-trap in place and may curve again to reach the wall. Look for a plastic or metal nut connecting the trap arm to the wall. If you can find one, loosen it to remove the trap arm. If you can’t, then it’s possible the arm is glued in place; don’t attempt to remove it in that case. Make sure you clean out the trap arm like you did the p-trap once you remove it.

Removing the trap arm gets you as close to the drain pipe as possible. Look inside the drain pipe to look for any obstructions. If you can see the obstruction, try removing it from where you are. If you can’t, you should use your snake.

4. Manually thread the auger head of the snake into the pipe. Insert the head of the snake into either the drain (if you didn’t remove the trap), or the access point on the wall. If you didn’t remove the trap, consider running cold water while you snake.

Don’t force the auger into the drain too hard, or you could damage the drain entrance or pipe. Be patient and make sure the head and cable aren’t too long for the drain you’re trying to snake.

5. Begin uncoiling the snake using the handle. Keep the handle of the snake as close to the entrance of the pipe as possible. The more slack the auger had has, the less force you’re supplying it.

Rotate the handle at a consistent pace. Don’t try to rush it or rotate too slowly. If you feel pressure at any point while the cable moves through the pipe, you may have encountered the obstruction.

6. Upon reaching the obstruction, move the rotate the head back-and-forth and up-and-down. Try to break up the obstruction as thoroughly as possible. Don’t try to jam the auger into the walls of the pipe, however. If you hear scraping noises, then you should stop snaking and re-adjust.

If you think the auger might be stuck in the obstruction, consider pulling the snake out of the pipe. In some cases, the obstruction may come out with it. Continue snaking until you no longer feel resistance and the snake uncoils to its full length.

7. Pull the snake out and re-assemble the sink components. Check the auger head for remains of the obstruction and clean it off. If you removed the trap arm and p-trap, then you should re-install them at this point.

8. Check the sink. The snake should have successfully removed the obstruction and solved the clogging problem. If you still seem to have a clog, then you could try repeating your snaking process again. Just like plunging, however, snaking too much can harm your pipes or drains. If a thorough snaking really didn’t solve your problem, then you should consider calling in the pros.

Snaking is a surprisingly easy and accessible homeowner project. As long as you understand how to use your snake, you should solve your problem without creating new ones.

Sometimes, however, you may not be able to beat that clog, no matter what you try. Don’t despair! After your snake, the next step is to call Mike Diamond. We’ve got the tools and know how to find and break up any clog, no matter how stubborn.

Dependable Plumbers Provide Quality Workmanship The Greatest Plumbers Are Well Known We're a full service Vancouver plumbing company who's able to carry out all your plumbing needs, including repair of leaks, new installations, maintenance or all sorts of work in commercial and residential settings. Toilet, tap or tub… whatever your are looking for you can call on us to send out a qualified plumber to handle everything in an efficient and considerate fashion. For dependable service, call us today or click here plumber

Emergency Plumbing Services Repairs can run from the minor variety - for instance a leaky faucet - to more critical ones which are, or might become, disastrous. Our professional team of plumbers have got the tools, skills and experience to take care of any dilemma that you run into, and they're specialists at pretty much anything from leak detection to pipework installations.

We can promptly handle all kinds of plumbing dilemmas which may occur at your home or business premises. If you have got a plumbing emergency in Vancouver, please contact us. We have an emergency 24 hour plumber available on call who'll be sent out to you as swiftly as is possible. Any time day or night, you can depend on us for patient and timely assistance in your time of need. We know how worrying plumbing related problems can be, in particular when it's an urgent situation after regular business times.

All Types of Plumbing Installations KCs Plumbing has a long standing reputation for top quality workmanship. Regardless if you want to have a new bathroom sink or a bit of pipe insulation installed, or you need an installation or re-piping in a residential or commercial property, we have the knowledge and the working experience to make certain any work is accomplished correctly.

We're well-known also as leaders in replacing plumbing systems in older homes, something that we have been undertaking for years, especially in a lot of the magnificent homes.

Our terrific commercial and residential plumbing service is the best option for modern homes and older homes.

We had been guided to that editorial about plumbing and heating from a good friend on our other web address. Loved our piece of writing? Please share it. Let another person find it. Do you know about someone else who is in to water heater leaking water? Take a moment to share it. Sharing is good. Helping others is fun. Thanks a bunch for your time. Come back soon.

KCs Plumbing & Heating Ltd
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753

     Blog home

The Wall

No comments
You need to sign in to comment


By Sandy Podolak
Added Dec 2 '20



Your rate:
Total: (0 rates)