Coal Extruder manufacturers Product Introduction: With the widespread use of coal rods machine, the types of charcoal stick machines are increasing, such as stamping charcoal stick machines, charcoal pulling machines, high pressure charcoal stick machines, etc. No matter which charcoal skewer machine, in the production process, there is a safe operation, pay attention to every detail, so as to ensure the safe production of charcoal skewer machine. The following is an introduction to the production details of the high pressure coal bar machine: 1. The high pressure charcoal stick machine should be operated carefully, and the machine head should not be blocked. If the raw material clogs the eye of the machine head, the machine head should be emptied and cleaned before assembly. 2. It is necessary to use the feed volume to control the current level and understand the quality. 3. To avoid deceleration caused by operation overloading or insufficient feeding. The high pressure coal rods machine should be stopped for reasons such as material supply or mechanical failure which causes material to be stuck for a long time. Because the high pressure coal rod machine is usually 75 kilowatts, it consumes 1.25 kilowatt-hours for one minute, and this electricity for the high pressure coal rod machine can be used to produce 83 kilograms of coal rods. It is also a waste of electricity when starting the coal bar machine quickly or under load.According to calculations, the electricity consumption of a quick start is 6-7 times more than that during operation. to me 4. The high pressure coal rods machine is very sensitive to a small amount of hard objects such as iron. The lighter coal can clog the nose of the machine and increase the current; In severe cases, it will not only damage the bearing and gearbox, but also burn the engine. 5. The working environment of the high pressure machine is dusty and dusty. After the motor and power distribution cabinet have been used for a while, check the accumulated dust and remove it. Before starting the machine, check the motor terminal and check whether the wire and power supply are normal. Parameter: ModelPowerCapacitySpeedDimension ZX-14011kw1-2ton/h46-60r/min2000*1230*380mm ZX-18022kw2-3ton/h38-50r/min2230*1000*850mm ZX-30075kw3-5ton/h132r/min2605*1025*955mm ZX-43090kw8-12ton/h132r/min2630*1520*1480mm Raw materials: The raw material could be coal, charcoal powder, or powder etc Field of application: After drying, the finished bars of coal rods machine are smokeless and tasteless when burned. And they can be used for large-scale barbecues, company entertainment, picnics, home heating, transportation, energy, agriculture, industry and other multi-functional purposes. All are necessary and development trends. It is getting bigger and bigger, and users are enjoying more and more features, which users love very much. The final charcoal shape: The shape can be solid or hollow. According to the different shapes of the mold, you can choose the required mold: square, round, hexagonal, quincunx, etc. Advantages: 1.Coal rods machine press the charcoal into different shapes by changing the mold. 2. In addition to conventional products, special molds can also be designed and manufactured according to customer requirements. 3. We have absorbed advanced technology and new designs at home and abroad. 4. The key components are processed with imported high-quality materials, and the production capacity is high.Coal Extruder manufacturers website:http://www.zxmachines.com/briquette-machine/coal-extruder/