Automatic Plastering Machine manufacturers Advantage: Gear rack transmision, much faster. APS-auto positioning system Enlarged hopper to 100Liter, put cement mortar into the hopper by trolley directly. Current protection, torque protection reverse phase protection, overload protection. Gas spring protection, electrical leakage protection. ModelTupo-9 WeightApproximate.130kg Power380V/220V (optional),50Kz-60Hz,1.1KW Working efficiecny500-600 Sqm/day Plasting thickness0.2cm-3.5cm Coating thickness5mm-30mm ElectricitySingle/Three Phase Plastering height3.5-5M PositionIndustry microcomputer automatic vertical system Plastering plateStainless steel Length of Plastering Trowel1200mm Plastering width1100mm Size1200*550*650mm Comparision between wall rendering machine and manual plaster: Strength: working efficiency:600sqm/day Speed:1 plastering machine=16 workers Operator:only 2 persons High efficiency:1minute can plaster 4sqm. effect:smooth, save cost of labor shortness of manual plaster: Slow working speed, high human caost, the effect is not so flat and smooth like automatic wall rendering machine Requirements before use A hardened floor is required so that 200 kg pressure per square centi-metre can be withstood. Spay water on the wall surface. Generally, the day before performing the work. The wall suface should be sprayed with water For walls made of different materials, the quantities of water sprayed on the wall surfaces are different. The details depend on the materials of the walls For wall surfaces with poor water absorption, please spray cement mortar on the wall surface in advance and contruct after solidification in order to make a rough first coating. Before construction, first check the flatness error of the wall. The recommended dot thickness is 1-2cm. before construction, the first thing to do is to position the bottom square tube. The role of the bottom squre tube is to ensure the horizontal flatness of the wall surface. Fixed point: make a row of cement points with an interval of about 1-1.2 meters at eh center of 14CM height from the ground, and 10CM fixed points from the corner. if you want to know more about this machine,please contact us directly. Email:[email protected] Mobile phone/Whatsapp:0086-18802956872Automatic Plastering Machine manufacturers website:http://www.langvicmachinery.com/automatic-plastering-machine/